diff --git a/README.md b/README.md
index 2e8f604416ae2ff2b04328a878fa311b1082f0eb..49ff107d772cf76cc3c6bb2906bc3697a7273e73 100644
--- a/README.md
+++ b/README.md
@@ -19,7 +19,29 @@ The machine-made creases are quite accurate but need to be re-folded so the box
 
 ![instructions1](img/foldmap_instructions1.png)
 
-Next, fo
+Next, re-fold the two curved creases. This is a bit more fussy since you can't just fold the whole line all at once; work your way down from one side to the other, making sure to follow the crease line:
+
+![instructions2](img/foldmap_instructions2.png)
+
+That's it for re-folding. Now, start assembling the box by inserting tabs into slots. First, connect the two pillar reinforcements:
+
+![instructions3](img/foldmap_instructions3.png)
+
+Then insert the patient arch connectors into the frame with the arch on the outside, noting that the snap from the previous step fits into a slot on the arch:
+
+![instructions4](img/foldmap_instructions4.png)
+
+Next, insert the doctor access panel connectors into the frame with the panel on the outside:
+
+![instructions5](img/foldmap_instructions5.png)
+
+Next, connect the two flaps below the doctor access panel. Note that the connector in the middle goes through one flap and then the access panel; if the material binds, reverse the stacking order:
+
+![instructions6](img/foldmap_instructions6.png)
+
+Finally, connect the four flaps to open the doctor access hatch:
+
+![instructions7](img/foldmap_instructions7.png)
 
 
 # ***Chronological Process***