diff --git a/README.md b/README.md
index a4718b9182a7a7c353bd229a299e6daab426b9d1..cc7254d75807047cf7ae720ef9e9345e23146dd4 100644
--- a/README.md
+++ b/README.md
@@ -117,5 +117,6 @@ Below we show a new design incorporating this magnet change and rotating the ICs
 I did a quick 3D print of this design to check clearance and assembly issues.  The flexure looks great (albeit obviously too compliant in the photopolymer material).
 
 <img src='v2/eden-prototype.jpg' width=310px>
+<img src='v2/v2-mill-max.png' width=310px>
 
 Next task is designing the AS5013 board and its connection to the main board on the end of the cylinder.  I'm thinking of using the four position Mill-Max spring contact connectors to save space over a wired connector.  It should make a solid electrical connection for the I2C lines, power, and ground, while allowing room for fine adjustments of the sensor carrier boards.  It's going to be a tight fit getting around the corner.
\ No newline at end of file