From 8ed21b2b08a293c5779476234839ef1ccb4bdf48 Mon Sep 17 00:00:00 2001
From: Sam Calisch <sam.calisch@cba.mit.edu>
Date: Fri, 6 Oct 2017 15:14:56 -0400
Subject: [PATCH] Update README.md

---
 README.md | 1 +
 1 file changed, 1 insertion(+)

diff --git a/README.md b/README.md
index a4718b9..cc7254d 100644
--- a/README.md
+++ b/README.md
@@ -117,5 +117,6 @@ Below we show a new design incorporating this magnet change and rotating the ICs
 I did a quick 3D print of this design to check clearance and assembly issues.  The flexure looks great (albeit obviously too compliant in the photopolymer material).
 
 <img src='v2/eden-prototype.jpg' width=310px>
+<img src='v2/v2-mill-max.png' width=310px>
 
 Next task is designing the AS5013 board and its connection to the main board on the end of the cylinder.  I'm thinking of using the four position Mill-Max spring contact connectors to save space over a wired connector.  It should make a solid electrical connection for the I2C lines, power, and ground, while allowing room for fine adjustments of the sensor carrier boards.  It's going to be a tight fit getting around the corner.
\ No newline at end of file
-- 
GitLab