From 4e3c82c8f61d3f641dd540101b758eccc70d42f4 Mon Sep 17 00:00:00 2001
From: Neil Gershenfeld <gersh@cba.mit.edu>
Date: Fri, 21 Dec 2018 13:41:59 -0500
Subject: [PATCH] wip

---
 Zund/README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Zund/README.md b/Zund/README.md
index a6278e0..0ddb1a3 100644
--- a/Zund/README.md
+++ b/Zund/README.md
@@ -6,6 +6,6 @@ Using a .030" diameter end mill with amorphous diamond coating (<a href='http://
 
 Here is a 50% scale flexure (.010" beams, .015" gaps) machined from .020" thick Aluminum 2024 sheet using a .015" diameter end mill with amorphous diamond coating (<a href='http://www.harveytool.com/ToolTechInfo.aspx?ToolNumber=72015-C4'>Harvey Tool 72015-C4</a>).  This took about 8 minutes, but I think could be run faster.
 
-<img src='images/flexure-0.5-penny.jpg' width=300px>
+<img src='flexure-0.5-penny.jpg' width=300px>
 
 Here is a paper about micromachining aluminum using tools with diamond-like coatings: <a href='https://pdfs.semanticscholar.org/a9d5/532adaf5fa1b22940a921fc9cdf2ea76b555.pdf'>Diamond coatings for micro end mills: Enabling the dry machining of aluminum at the micro-scale, Heaney et. al.</a>
-- 
GitLab