Skip to content
Snippets Groups Projects
Select Git revision
  • d8916ad8bf7427030c1b71ecd677815f70525d36
  • master default protected
2 results

README.md

Blame
  • README.md 4.69 KiB

    Build Notes for Clank-LZ

    this page occasionally loads slowly

    The CAD

    final

    Clank was developed in Fusion 360. The most recent .f3z (Fusion 360 Archive) and .step files are available in the CAD folder in this repo. These files have enough hardware included that one should be able to figure out which bolts / etc go where, but are not complete (i.e. in a group of four bolts, three may be missing).

    the latest fusion 360 file
    the latest step file
    the latest rhino file (thanks Zain!)

    The BOM

    A Bill of Materials for the lz machine is available in this spreadsheet. Most parts can be sourced from McMaster, DigiKey or Amazon (in the US). Other vendors include SDP-SI and Stepper-Online.

    Hardware totals to around $400 USD for the machine.

    Controllers used here cost about $250 USD.

    The Controller

    Our versions of Clank use experimental controllers that aren't available publicly, but the machine could easily be configured for use with any off-the-shelf GCode interpreter.

    Clank-LZ Controller Repository

    Build Notes

    Bunch of videos, more or less in order:

    Kit Contents Video
    Frame Build Video
    Y Left Build Video
    Y Right Build Video
    X Carriage Build Video
    Z and Spindle Build Video
    Final Assembly Video
    Wiring Video

    If vimeo is down or slow, you can also download these videos here in the repo

    Rob's Build Notes

    here

    Final Checklist